4) You will need to have on hand water heater tape, small gas torch, solder, flux, plumbing sandpaper, pipe cutter, gas tape (to seal gas line) and maybe some pipe glue. Ask the sales person at the hardware store for a more defined list.
The repair of a ballcock tube is the simplest repair of all toilet leaks. There is a small black tube that is in the tank of the toilet that connects to the flush valve fill tube. If the tube slips from the little clasp that holds it in place, it can begin spraying water line repair in the tank and out from under the tank cover. To fix this toilet leak, simple re-attach the black tube to the clip. It really is that simple.
If you bought the same unit it should line right up, if you were unable, you will need to remove or add length to the existing piping. This may require you to splice together copper with plastic, don't let this scare you the hardware store will have all of the necessary parts.
The next step in this process is to determine what type of method is available for fixing the problem. You cannot just caulk a crack or fill it in with cement and hope for the best. Unfortunately, there is more work than this because you have to fix the problem from both the inside out and the outside in. This takes a professional in most cases to determine the best method for repair.
The first step in the replacement project is to turn off the water line repair to the toilet and flush any water that may be in the tank. If you forget this step, you will have a giant mess to clean up! You should now disconnect that water line.
Turn the water off at the main shutoff valve at the street. You should be able to take a pair of pliers(or your bare hands) and turn the valve at the water meter to shut off the water to your home. Once you have shut off the water you can cut the pipe around the leak and make the repair.
The next huge thing is to prevent and kill mold that has already started growing. Mold is the most dangerous thing when an area floods. Mold can turn deadly within a extended period of time. Use mold killing agents like Killz and other products on the the market. Be extremely thorough with this process. If the water flooded above the dry wall line, you MUST remove the dry wall to make sure you can replace insulation and dry wall which mold naturally is attracted to. Painting a Killz primer on the concrete is a great idea before installing new carpet and drywall. This will ensure that you have prevented future mold growth and will also ensure the safety of your family.